Our barrel vise jaw pads is a 2-piece set and works great for both rifle and pistol barrels. These are made from non-anodized “dead soft” 6061 aluminum billet so that you will get a better grip on the barrel and not mar the barrel’s finish. These are made to fit most barrel diameters. They drop into your vise for clamping, are very easy to use, and grip the barrel so you can install end-of-barrel accessories, clean the bore and chamber, or perform other maintenance. This is a must-have for the firearm enthusiast. They will also work on slightly tapered barrels, such as the Ruger 10/22 (the chamber area on most rifles is not tapered). These are “U” blocks (not “V” blocks). These are machined for a 3/4″/19mm diameter barrel; a smaller barrel will be gripped on “flats” of the larger radius, while a larger barrel will be gripped by the edges of the radii. Forget those welded, screw together clamps; use these instead. No wood blocks or split bushings, spacer, or sleeves here. You can clamp the action on the flats and the barrel in the groove. — INSTRUCTIONS: Simply clamp down with your bench vise and the barrel won’t spin (5″ minimum bench vise for best results). — LIFETIME GUARANTEE — DESIGNED, DEVELOPED, AND MANUFACTURED IN THE USA.
Manufactured from “dead soft” 6061 aluminum for superior grip
Fits any size or shape barrel
Use the full power of a bench vise